Idl2-20vertical Immersed Multi-Stage Centrifugal Pumps

• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Model NO.: IDL2-20
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Circulating Pump
• Protection Class: IP55
• Insulation Class: F
• Liquid Temperature: Normal Type -15c~+70c
• Standard Voltage: 50Hz: 1*220-230/240V
• Transport Package: Fumigation Wooden Crate
• Trademark: Huayang
• Origin: China
• HS Code: 84137000

Product Description

Industrial Pumps » IDL Series Immersion Multistage Centrifugal Pump

Immersion type multistage centrifugal pump
Applications :
High rise buildings
Lathe
Grinding machines
Processing centers
Cooling devices
Industrial cleaning equipment
Filtering system
Description :
These pumps are compact, highly reliable, low maintenance and easy to install. This immersion multistage pump has Flow Range (Q) 0.4-55.0 M3/hr and Liquid Temperature -15°C - +120°C.


Typical Application
IDL is used for conveying machine tool coolant, lubricating 
liquid and condensed water, industrial cleaning equipment 
and other occasions suitable for immersion pump. IDL is 
suitable for non-corrosive liquids, and IDL is suitable for 
mildly corrosive liquids.
Specifically used in EDM, lathe, grinder, machining center, 
cold unloading device, industrial cleaning equipment, filter 
system, etc.


Pump Description
IDL is a non-self-priming submerged multi-stage centrifugal pump equipped with a standard motor. It adopts a 
structure in which the motor shaft and the pump shaft are 
directly connected by a coupling.
In order to meet the installation depth of the water tank or 
container, the cavity of the empty sleeve can be installed to 
change the immersion depth of the pump itself. For different 
series lengths, see the dimension and weight table and the 
available product range table.

Motor
Full-enclosed, air-cooled secondary standard motor
Protection class: IP55
Insulation class: F
Liquid temperature: Normal type -15ºC~+70ºC
Standard voltage: 50Hz: 1×220-230/240V
3×200-230/346-380V
3×220-240/380-415V
 3×380-440V
Motors of other voltages are available upon request.
Single-phase motors are available from 0.37 to 2.2kW.

Operating Conditions
Thin, clean, non-explosive liquid free of solid particles and fibers, 
can transport water, cooling water solution and cutting lubricating 
fluid.
Liquid temperature: Normal type -15ºC~+70ºC
Hot water type -15ºC~+120ºC

Altitude and ambient temperature

When the pump runs when the ambient temperature is higher than 
40ºC or the altitude is higher than 1000m, the output power P2 of the 
motor will decrease. Therefore, the motor power of the pump should 
be increased under the above conditions.

Performance Curve
All curves are based on motor measurements at constant speed of 
2900rpm.
The curve tolerance conforms to ISO9906, Appendix A.
The test adopts water without air at 20ºC, and the kinematic 
viscosity is 1mm2/s.
The use of the pump refers to the performance range of the bold 
curve,in order to prevent overheating due to too small flow and 
overloading the motor due to excessive flow.

Model	Power (kW)	Q (m³/h)	0.8	1.2	1.6	2.0	2.4	3.0	3.4
IDL2-20/2	0.37	H (m)	18.5	17	16	15	13.3	11	8.5
IDL2-30/3	0.37		28	26	24	22	20	16.5	13
IDL2-40/4	0.55		37	35	33	30	26.5	22	17.5
IDL2-50/5	0.55		45.5	43	40	34	33	27	21.5
IDL2-60/6	0.75		54.5	52	49	45	40	33	26
IDL2-70/7	0.75		64	61	57	52	47	38	30.5
IDL2-90/9	1.1		82	78	73	67	60.5	49.5	39
IDL2-110/11	1.1		100	95	89	82	73	59	47
IDL2-130/13	1.5		119	114	106	98	88	71	55.5
IDL2-150/15	1.5		137	130	122	112	101	82	64.5
IDL2-170/17	2.2		157	149	140	128	115	94	75
IDL2-180/18	2.2		166	157	148	136	122	100	80
IDL2-200/20	2.2		183	174	164	151	135	110	89
IDL2-220/22	2.2		200	192	180	165	149	121	98
IDL2-240/24	3		219	209	197	181	164	133	107
IDL2-260/26	3		239	228	214	198	179	145	116